Bostig Installed

A month later than originally intended, the Zetec is installed in Olly. The delay was due to hold-ups on Bostig’s end, but to be fair, I had quite aggressively high expectations about the timing of the project. When I expressed my frustration to Jim about the teasingly slow trickle of parts, he was quite apologetic about the whole situation, and from then on Nate then kept me posted with progress updates. Unfortunately, my summer travel plans revolved around a completed engine conversion and a deadline, and so therefore fell through.

Even if Bostig had shipped out on their timetable, I realize I probably would have been pressed to complete all aspects of the install in just under three weeks. It wouldn’t have been impossible, but converting an engine is a Very Big Thing, and even in as well documented a system as the Bostig, there’s going to be some quirkiness that varies from vehicle to vehicle that just needs to be worked through. And that doesn’t include rework when you fuck things up due to your own personal level of ineptitude. Mine wasn’t terribly high, but sufficient to keep things interesting. Like when I over-torqued one of the transmission mount bolts. My advice is to avoid doing that.

Another factor that slowed progress is that I did the conversion completely solo. For most of the process that’s perfectly fine, though there are a couple of points when an extra pair of hands or eyes can be helpful. The real problem with working alone was that I had to be my own supervisor, which meant a lot of double or triple checking to make sure everything was right. None of the install is complicated, but I am not an auto mechanic by trade and I hate fixing things I should have gotten right the first go around. Since there was no one to catch my mistakes but me, I took my time.

And that’s how it is supposed to be. Because let me say this: doing the Bostig conversion was tremendous fun. Okay, working in 100 degree Texas heat was not so much fun. And being covered with grease and grime was not particularly entertaining either. But that aside, the whole system is so so well designed that it was delightful to assemble and install. And when you turn the key (and it starts, after unsticking the injectors) it is pure joy. I’d do it again in a heartbeat. Of course, that would involve buying another Vanagon, which isn’t the worst idea I’ve ever had.

For what it’s worth, driving the van is fun. It’s got decent pick-up and drives 70 with power to spare. I admit that I’ll miss the chugging sound of the boxer engine, but the Zetec definitely sounds confident and ready. And the engine’s got just enough low rumble to let you know that while it may have been born in a Ford Focus, you should not mistake it for some wimpy girly motor that can’t carry it’s weight. It has found its place in a Vanagon.

There’s still a handful of things to do. I’ve got some parts coming, including a brake booster line attachment, which will need installation. I’m still doing some road testing to make sure everything is in specification. Electrically, everything’s fine. Fuel trims seem good. The cooling system is working, but is running much hotter (210-225 degrees F) than the WBX did, so my stock gauge and idiot coolant level light are quite angry. I know there’s some air that still can be bled out of the system, which should help bring the temps down slightly. And I didn’t switch the radiator send and return lines as Bostig recommends. Jim says that shouldn’t be a problem, and has even assured me that my temp ranges are fine, but I’d still like to see what I can do to cool things down. In any case, I definitely need to examine the gauge and temp sender, as right now they’re effectively useless. Eventually I’ve got to find an A/C guy who can make some new lines. Things to do, but they will get done.

Originally I thought I’d drop the Zetec into the van in a weekend, tune it up, and then roar off to the mountains of Colorado. That didn’t happen. I didn’t get the vacation I wanted this summer, but I did get the van I wanted. There will be more summers (and Texas autumns, winters, and best of all, springs). I’m quite confident that when those seasons arrive,  Olly will be up to the task of taking me to the places I want to go.

 

4 comments

  1. Jed says:

    Congratulations! I just did my first start tonite . . . . 10 days behind you. My frustrations with the delayed shipment had more to do with doing things out of order.

    Like you, I underestimated the amount of time required, but I kept adding new things to the list as I discovered them . . .

    I still need to bleed the air out of the cooling system. I note that you didnt swap the hoses in front. It required me to add a short section of hose so that the “short hose” could reach the “short pipe.” And the hoses cross above the spare tire, which may add some constriction to the flow.

    It sure felt great to start it up (again like you . . . after unsticking the injectors).

    Jed

    • kpcnsk says:

      That first start feels great, doesn’t it?

      Yeah, I didn’t switch the hoses, for exactly the same reason you had to add a section of hose. I haven’t had any problem, although bleeding the system was a bit of a pain. I think I’ve got it mostly bled now though. I talked with Jim A. about it, and he mentioned that swapping the hoses shouldn’t make a huge difference, and that he in fact hasn’t switched them on his own van. He said that contributes to some noise in the radiator, but I haven’t noticed anything abnormal on mine. I may just leave it this way, now that everything seems more or less happy.

      Hope your first drives go well. The van sure is fun to drive now.

  2. Carl says:

    Did the Bostig thing about two years ago now and only one problem. Too much power (maybe too much heat) for the auto trans. Blew up the old one and fried the main shaft seal twice on the rebuilt one. The third seal seems to be holding so far but I don’t drive it over 60-65 mph for long distances. The engine is great, the transmission not so much. Maybe I should ask Jim Akiba if an Audi transmission would work in it? Loved the engine conversion. Easy and straightforward.

    • kpcnsk says:

      I don’t know much about the Vanagon automatic transmissions, other than the reputation that they’re pretty strong but not built for speed. I suspect that when doing engine conversions, the transmissions become the weak point in the power train. Daryl at AA Transaxle recommended I keep my manual transmission to stock specs. I wouldn’t be surprised if part of the motivation behind that is to keep the transmission as strong as possible (thus allowing him to produce a more reliable product). In any case, I’d definitely talk to Jim.

Leave a Reply

Your email address will not be published. Required fields are marked *