Tag: vendor

Goin’ Immobile

It hasn’t really been a good spring for Olly. He’s spent a fair bit of time in the garage, which is better than being in the driveway, but he hasn’t gone much further than that. That makes him (and me) a bit sad.

On the bright side, I’ve managed to do a lot of things to Olly while he’s been in the garage. It all started with an idea to replace the heater/vent fan before summer rolled around. Of course, that necessitates dashboard removal, so since it was out anyway, it was a good time to take care of a number of other tasks, like some rust mitigation, wire management, heater box restoration, speedometer cable replacement, brake cylinder replacement, sound proofing, and relocation of the power window switches. While I was in there I removed the stock cruise control hardware and lubed up anything that I could. While I was waiting for parts, I took the seats out and repainted the swivel bases with POR-15 and rattlecan Rustoleum top coat. The bases are much nicer looking now, and turn smoother as well. The passenger side could use some new bushings, but I just couldn’t justify spending $70 for a few pieces of plastic right now. At any rate, pretty much the entire front cab was gutted in the process, and all told that kept Olly off the road for a good month in March.

I also transferred the my existing wiring harness and gauges to the instrument cluster I’ve restored. I love having actual tabs to connect the cluster to the dash. It’s the little things, you know.

Here’s a few notes for future reference, in no particular order:

  • I bought the master brake cylinder from Van-Cafe, and it came with the brake light switches pre-installed. Unfortunately, they are 3 prong switches, so I had to cut out the middle terminal and bend the outer ones inwards slightly so that I could keep the stock connectors.
  • The sound deadening material I used was from SoundDeadenerShowdown.com. I like his products and website, although he doesn’t have a proper online store. Everything makes a dull “thunk” noise when hammered instead of sounding like the inside of a trash dumpster.
  • The padded elements of the dashboard apparently can be removed. This would make painting and restoring it so much easier than the masking that I did.
  • I moved the power window controls to the dash a la GoWesty, but without their million dollar kit. I actually did a lot of research looking for the ideal switches, and would actually have used the stock VW switches if they weren’t so durned expensive. So I found a kit made by SPAL Automotive sold by A-1 Electric. The switches are stock size, and so fit into the VW bezel, and they are illuminated unlike the GoWesty kit. On top of everything, they look appropriate to late 80’s automotive styling, so they don’t feel out of place. I did a bit of splicing to utilize the stock wiring as much as possible, and the result is wonderful. Both windows raise and lower without problem. The switches require a slight lean across the cab from the driver’s seat, but it’s not uncomfortable what with my gorilla arms.
  • I’d like to get some stock fuse holders to add to the fuse panel for a few accessories: the Bostig MIL indicator and the radio.
  • Also, still need to create some kind of filter for the air intake to keep Olly from collecting butterflies.
  • The steering wheel shaft has a bit of play in it, and I assume it’s due to some bushing wearing out in the upper column.

I got Olly reassembled long enough for him to star in a movie. I was able to enter Bostig’s spring contest and will post a link to the video once the contest closes.

Olly’s mobility was short lived, however, and ended when I decided it was high time to tackle the wheel bearings. Suspension and wheels scare me, I don’t know why. Probably because these can be really tough jobs to do without a lift and a press of some sort. Also, screwing them up can be really bad. In any case, Olly’s wheels came off so that I could replace and lube all 4 bearings, and none of it was actually that difficult. The job got drawn out when I decided to replace the brake hardware while I was in the neighborhood. I also encountered a snafu involving a broken rear bearing case. It was remedied by Ken Wilford at Van-Again, who is really a great guy. I posted my problem to the Vanagon list serve, and he volunteered to help. A call the next day resulted in a quick payment transaction, and a completely rebuilt rear bearing case was on its way.

For what it’s worth, I have no real complaints about any of the various parts vendors, and use them all. Ken does deserve special mention because he’s very knowledgeable and down-to-earth in his explanations. I’ve also found his YouTube channel to be a nice supplement to Bentley for some quick-and-dirty guides to some dirty jobs.

So now the van is running on all four wheels again. This is a good thing, as I decided to fix the broken window motor in the Bimmer, so now it’s holed up in the garage. The joys of owning 80’s automobiles.